[Syty] What is TV valve lifter rod?

[Peter]

Gentlemen,
   
  While working on the throttle body last night, I disconnected the TV cable.  When I reconnected and took a test drive, the shift points are delayed and extremely hard.
   
  Section 7A1-58 of the service manual says something about the "TV valve lifter rod" dropping down to allow the TV exhaust ball to seat if the cable is broken, disconnected, or extremely out of adjustment.  I think this is what happened.
   
  It then says if the transmission pan is removed, it should  be possible to pull down on the TV exhaust valve lifter rod and let the springs return the rod to its normal up position.
   
  No pictures or other mention of the TV valve anywhere that I can find.
   
  Has this happened to anyone else?  If so, any tips on correcting it?
   
  Thanks,
   
  Peter Albrecht
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syty.org/pipermail/syty/attachments/20060103/2e6f633b/attachment.html