[Syty] Need Help

[Jason Granger]

Code 43 EST typically points to the knock sensor.

They are cheap but a pain to replace.
You can find it threaded into the block just behind the drivers side head.
It will have a single dark blue wire leading to it.

Be sure to not overtorque it.
I think it is rated for 14 ft/lbs.



MrGhst at aol.com wrote:     Dear SyTy Intelligence Squad:
     The other day as I made a turn, the engine  died.  It re-fired right away upon key turn and the tach jumped around a  bit but settled down.  When the engine RPM dropped to 1000 RPM it died  again.  I found myself nursing it home keeping it above 1000 RPM.   (Not a problem except at lights and stop signs.)  I got a code of 43  that my code reader says is EST circuit - low voltage detected  or ESC circuit problems.
     Could this be THE problem or is this a  different problem?  If it is THE problem, what's the next  step?  (I guess either way, I'll need to know the next step.)  If it  is not the problem, what else should I be looking for?
  
 Thanks, 
 Mark 




---------------------------------
Get a sneak peek of the all-new AOL.com.
_______________________________________________
Syty mailing list
Syty at syty.org
http://lists.syty.org/mailman/listinfo/syty



Jason
92 Typhoon #2407
www.sytyauthority.net - admin
www.syty.net - admin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.syty.org/pipermail/syty/attachments/20070720/969df1e7/attachment.html