<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
PS: The US Government put out a contract back in the early 50's for a
solution to the old Jeeps that when driven through streams and the like
would get water in the electrical system and they needed something that
would work to displace the water quickly and allow the troupes to move
on. The company that finally got the answer tried 40 times with various
compounds before they were successful. The reason was it had to allow
electrical current to continue and not be blocked by the compound. <br>
<br>
They named the product WD-40 (Water Displacement - 40th try) <br>
<br>
There are so many uses that were found for this miracle spray later,
but many have forgotten it's original purpose.<br>
<br>
WD-40 is cheaper than ether and easier to find.<br>
<br>
Here is the website that has the details of the history of WD40, read
the second paragraph.<br>
<a class="moz-txt-link-freetext" href="http://www.wd40.com/AboutUs/our_history.html">http://www.wd40.com/AboutUs/our_history.html</a><br>
<br>
A little trivia,<br>
Lewis Straughn<br>
<br>
Lewis Straughn wrote:
<blockquote cite="mid43BC0273.5000301@netscape.com" type="cite">
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
<title></title>
Dennis, <br>
<br>
I had the same problem with the screws in the distributor cap and that
will cause the problem you are having. I know it is hard to get to that
screw, but what I had to do was just get one screw started a couple of
turns and then get the other one going and then be sure I had the cap
pushed down to the bottom and seated in position and then tighten each
screw a little at the time until I had them both tight. I don't know
why it is so hard to get the cap in position, but it is and when you
get it you will know it. I had to walk away a couple of times because
it was a job for Houdini.<br>
<br>
Hope that helps,<br>
Lewis Straughn<br>
<br>
DOlivares wrote:
<blockquote cite="mid002901c6113f$f7d48630$05f46942@coresys1"
type="cite">
<title></title>
<meta http-equiv="Content-Type" content="text/html;">
<meta content="MSHTML 6.00.2900.2802" name="GENERATOR">
<div><font color="#000080" face="Palatino Linotype" size="4">Yep,
had <em>all</em> those bases covered before admitting to being STUMPED!</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">FPR is
brand-new; Conrad Cap and Rotor are brand-new, although <em>only one
bolt can be secured</em> to the Distributor-- bizarre manufacturing
flaw... anyone else ever see this? I just bought another one
yesterday, but that <em>won't</em> fix this problem....</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">I've
taken enough engines through hot pressure-washes to recognize and know
how to defeat water in the Distributor as well: a screwdriver and a
spray-can of ether!</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Keep
trying,</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">D.O.
<hr></font></div>
<div> </div>
<div
style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;">-----
Original Message -----
<div
style="background: rgb(228, 228, 228) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><b>From:</b>
<a title="theodore.metzing@verizon.net"
href="mailto:theodore.metzing@verizon.net">Ted Metzing</a> </div>
<div><b>To:</b> <a title="seravilo@netzero.net"
href="mailto:seravilo@netzero.net">DOlivares</a> </div>
<div><b>Sent:</b> Monday, January 02, 2006 9:54 PM</div>
<div><b>Subject:</b> Re: [Syty] Broke & Stumped!</div>
</div>
<div><br>
</div>
Hey Dennis, I'm not all that great at diagnosing problems but when you
said that you replaced the fuel pump to the Walbro, did you re-adjust
the FPR? Maybe too much gas for a cold engine to burn off until warm?
Or what about a crack in the distributor cap, letting moisture build up
inside it from the previously warm motor (when off) then when cold the
moisture is preventing the spark from arcing? Had a problem like that
on my Harley with the coil-pack, wouldn't start until all moisture
evaporated (warm day or a hot motor). These are just guesses, again not
qualified as a problem solver. Good luck.<br>
<br>
Ted Metzing<br>
93 TY #0190<br>
06 Trailblazer SS<br>
<br>
<br>
DOlivares wrote:
<blockquote cite="mid000d01c60fc7$36f62f50$10f46942@coresys1"
type="cite">
<meta content="MSHTML 6.00.2900.2802" name="GENERATOR">
<style></style>
<div><font color="#000080" face="Palatino Linotype" size="4">Thanks...
so far, and happy New Year... <em>et pax hominibus boni voluntatis!</em></font></div>
<div><font color="#000080" face="Palatino Linotype" size="4">[You
know who you are.]</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Unfortunately,
I have <em>tried</em> all those diagnostic trees-- even a couple of
bushes for good measure! This episode has been going on for nearly a
month. As I said, I'm running out of hardware to swap-out. The only
things I haven't diddled with is the <strong>EST Module</strong> in
the Distributor and of course the <strong>ECM/chip</strong>. </font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">The
reason I haven't fooled with those things is that the misbehavior
complained of is SO PREDICTABLE and only afflicts COLD-START-UP
conditions, except when it's really cold outside in which case I will
get precisely ONE chug-a-lug spasm about 5 minutes into the run-up to
full operating temperature... just after everything had been going just
fine. That's the worst of it... as far as I can tell without a
scantool... seat-of-the-pants power and smoothness is better than ever,
otherwise. This is no "intermittent." This is pure predictability!
And my experience with bad chips and modules is that they either fail
outright or exhibit sporadic, random upsets... before failing
outright. That's not what's occurring. Even so, I might drop in my
spare EST (Holley Annihilator) just for laughs....</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Keep
thinking... what <em>else</em> could it be??? What's the connection
to cold/cool ambient temperature?</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">D.O.
<hr> </font></div>
<div
style="font-family: arial; font-style: normal; font-variant: normal; font-weight: normal; font-size: 10pt; line-height: normal; font-size-adjust: none; font-stretch: normal;">-----
Original Message -----
<div
style="background: rgb(228, 228, 228) none repeat scroll 0% 50%; -moz-background-clip: initial; -moz-background-origin: initial; -moz-background-inline-policy: initial;"><b>From:</b>
<a title="leroy@sunflower.com" href="mailto:leroy@sunflower.com">Jim
Sloan</a> </div>
<div><b>To:</b> <a title="seravilo@netzero.net"
href="mailto:seravilo@netzero.net">'DOlivares'</a> ; <a
title="syty@syty.org" href="mailto:syty@syty.org">syty@syty.org</a> </div>
<div><b>Sent:</b> Monday, January 02, 2006 8:11 AM</div>
<div><b>Subject:</b> RE: [Syty] Broke & Stumped!</div>
</div>
<div><br>
</div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">Happy New Year Dennis!</font></span></div>
<div align="left" dir="ltr"><span class="004520414-02012006"></span> </div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">I've had hardware problems with
several of the 10-1 adapters. You could swap back to the stock memcal
(and map sensor) to rule that out, if your build isn't too radical.</font></span></div>
<div align="left" dir="ltr"><span class="004520414-02012006"></span> </div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">I usually keep at least one
spare ecm for a substitution test, and have seen quite a few fail in
weird ways. Let me know if you need one.</font></span></div>
<div align="left" dir="ltr"><span class="004520414-02012006"></span> </div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">Sometimes it helps to go back to
the basics, and follow the diagnostics in the service manual <a
href="http://syty.org/old/d&e-code44.html">http://syty.org/old/d&e-code44.html</a> .</font></span></div>
<div align="left" dir="ltr"><span class="004520414-02012006"></span> </div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">Just a few ideas, if you haven't
already tried them.</font></span></div>
<div align="left" dir="ltr"><span class="004520414-02012006"></span> </div>
<div align="left" dir="ltr"><span class="004520414-02012006"><font
color="#0000ff" face="Arial" size="2">Jim </font></span></div>
<br>
<blockquote
style="border-left: 2px solid rgb(0, 0, 255); padding-left: 5px; margin-left: 5px; margin-right: 0px;"
dir="ltr">
<div class="OutlookMessageHeader" align="left" dir="ltr"
lang="en-us">
<hr tabindex="-1"> <font face="Tahoma" size="2"><b>From:</b> <a
class="moz-txt-link-abbreviated" href="mailto:syty-bounces@syty.org">syty-bounces@syty.org</a>
[<a class="moz-txt-link-freetext" href="mailto:syty-bounces@syty.org">mailto:syty-bounces@syty.org</a>]
<b>On Behalf Of </b>DOlivares<br>
<b>Sent:</b> Sunday, January 01, 2006 7:36 PM<br>
<b>To:</b> <a class="moz-txt-link-abbreviated"
href="mailto:syty@syty.org">syty@syty.org</a><br>
<b>Subject:</b> [Syty] Broke & Stumped!<br>
<b>Importance:</b> High<br>
</font><br>
</div>
<div><font color="#000080" face="Palatino Linotype" size="4">Who
watches The Watcher? </font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Who
advises The Guru?</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Who
assists The Good Samaritan?</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">I
think we're about to find out pretty soon-- at least until I can get my
Lapdog running again (and one of the diagnostic programs to
troubleshoot my li'l pony)</font><font color="#000080"
face="Palatino Linotype" size="4">:</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Meanwhile,
I NEED HELP! With my laptop in pieces all over the bench, I can't run
DIACOM or DATALINK to give me clues about the usual suspects:</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Clean-livin'
doesn't always pay off if my holidaze so far are any indication. I
spent Christmas Eve on a carlift taking apart my right-front axle--
again!-- after being assured by our local "Gear-Guru" (who fully
rebuilt that differential less than 6 months before I started hearing
that same CLUNKING on left turns again) that all I needed was a new
cir-clip (GM #14041989) to keep the axle from popping-out of the
side-gear in the differential. HAH! More bad advice and I ended up
taking a cab home.... More about that Horror Show in a later mailing.</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Meanwhile,
we got our first technical freeze down here in what was becoming <em>tropical</em>
San Antone on Nov. 17th and our first hard-freeze, appropriately, on
Dec. 7th, and somewhere in between those times ol' Syclone #773 began <strong>throwing
fits during start-up and for the first 5 or 6 minutes until the water
jacket hits and stays at 180°</strong> or so. I'm stumped for the
first time in a decade or more! Here's what happens:</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Since
the <em>new</em> Walbro fuel-pump went in a few months ago, cranking
times are way down... engine catches pretty quick, but now it won't
stay lit and "choke" with the <em>new</em> IAC, which went in along
with a <em>new</em> TPS and remote-adjustable FPR about a month before
the new Walbro. Now, I have to feather the pedal once the ignition
gets going and hold the throttle open a bit while the IAC hunts for
about a dozen cycles making the tach swing about 1200 rpm back and
forth until we hit the "sweet spot" and the engine takes off smoothly
and the IAC-hunting stops, at least for a while. Now, it's safe to put
her in gear and drive away as long as I keep a little positive bias in
the pedal for the next few minutes every time I have to slow down to an
idle or coast speed. </font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">THIS
PROBLEM IS WICKEDLY WORSE ON COLD DAYS, where ambient air is in the 40s
or below, which thankfully is rare. (Ain't this global-warming
great!) However, on a couple of occasions when I did have to drive in
the 30s-- and even <em>after</em> reaching full-warm-up temperature--
the engine starts cutting out seriously as the SES light comes on!
Now, we're talking some MAJOR pumping of the pedal to keep things lit
and if I can get on a clear piece of road and cruise a spell at 35 mph
or better the problem goes away <em>completely</em>, until I shutdown
and the engine gets cold again. I barely even recognize that SES
light... hardly ever see it. Driving on warmer days never sees a
recurrence of that mid-period cutting-out, and idle is smooth as is the
rest of drivability. Warm start-ups see a few moments of that
IAC-hunting, but the rpm-sweeps are only on the order of 500rpm and the
whole anomaly goes away in about 30 seconds. I've NEVER encountered
anything like this in my many years of wrenching! Now, it's time for
some wretching!! All that ever gets logged in the way of a
trouble-code is <strong><font color="#ff0000">44</font></strong>...
not too helpful!</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Naturally,
I replaced the O2 sensor-- no improvement at all! Everything described
above instinctually told me this was a weird thermal transient in the
injector-drive circuits or else the MAT, CTS or MAP I replaced (for the
hell of it) 3 years ago needed to be switched again. So I <em>did</em>...
one at a time to see if I could fault-locate the culprit that way. No
dice! I'm running out of hardware to replace! I've even tried setting
that 10-to-1 Chip to different settings, but the same nasty behavior
persists-- the engine's as well as my own!</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4"><strong>WHO
CAN TELL ME WHAT MY PROBLEM(S) IS?</strong> Be nice, now....</font></div>
<div> </div>
<div><font color="#000080" face="Palatino Linotype" size="4">Dennis
O.</font></div>
<div> </div>
</blockquote>
<pre wrap=""><hr size="4" width="90%">
_______________________________________________
Syty mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Syty@syty.org">Syty@syty.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.syty.org/mailman/listinfo/syty">http://lists.syty.org/mailman/listinfo/syty</a>
</pre>
</blockquote>
<br>
<pre wrap=""><hr size="4" width="90%">
_______________________________________________
Syty mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Syty@syty.org">Syty@syty.org</a>
<a class="moz-txt-link-freetext"
href="http://lists.syty.org/mailman/listinfo/syty">http://lists.syty.org/mailman/listinfo/syty</a>
</pre>
</blockquote>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
Syty mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Syty@syty.org">Syty@syty.org</a>
<a class="moz-txt-link-freetext" href="http://lists.syty.org/mailman/listinfo/syty">http://lists.syty.org/mailman/listinfo/syty</a>
</pre>
</blockquote>
</body>
</html>